7100-7504 Amity Ave, Kansas City MO

Description: Install 508' of 2 inch plastic gas pipe south on the east side of amity ave. work to be completed by mge. this permit is issued by the company using a "remote access" arrangement with the city and except in the case of an emergency as defined by the city's ordinances rules and regulations is issued prior to commencement of the work. by use of the system the company acknowledges its obligation to comply with all applicable ordinances rules and regulations in effect during the period the work authorized by this permit is performed. although the company has no legal entitlement to the remote access system its use may benefit the city and the company. however the company acknowledges that violations of the applicable ordinances rules and regulations and terms of this permit may result in termination of the company's use of the remote access system at the city's discretion.

Description: Requirements:. the contractor may begin 500' north of outer road to occupy southbound west curb lane of n. amity ave 700' north. also contractor will use the inside northbound lane of n. amity ave for southbound traffic. the contractor shall provide install and remove all signs barricades and channelization devices shown on the attached drawings. access to adjacent properties shall be maintained. all open excavations shall be plated and the street reopened to traffic during non-working hours. the contractor shall provide safe facilities for pedestrian traffic. the traffic control shall comply with part vi of the mutcd at all times. this permit must be on the job site at all times. unless otherwise stipulated in this permit access to loading zones shall be maintained.

Description: Demolish single family res.

Description: Where is the plate located: 8600 n. amity. plate purpose : cover for at&t 4 - 4 way duct excavation. project no.: 6474817. plate size: 8' 12'. contact: # [816] 513-8700 when plates are removed. number of plates: 4. date plates set: 10-8-09. estimated pickup date: 10-29-09.

Description: Where is the plate located: in the vicinity of 8400 n amity. plate purpose : cover hole. project no.:n/a. plate size: 5 10. contact: # [816] 513-8700 when plates are removed. number of plates: 2 date plates set: 12/1/08 estimated pickup date: 2/1/09.

Description: Install 200 amp electrical service and electrical wiring for park lighting per plans reviewed for code compliance.

Description: Requirements:. the contractor may close n amity at nw 104th st. the contractor shall provide install maintain and remove the signs barricades and channelization devices as shown on the attached drawing. the traffic control shall comply with part vi of the mutcd at all times. a copy of the permit must be on the job site at all times.

Description: Discription of work:. to execute land disturbance works for an area of 4 acres for twa-rcra corrective measures located in platte county of kansas city missouri.